fix: /config gives the state of caddy.service with the installed Caddy, for the Router Manager's Web page.

ADR.md

@@ -913,7 +913,7 @@ ticket gets the shell. The WebSocket of RFC 6455 is implemented on the standard
 web service's `http.server`, server side only, without extensions. `systemd-run --pty` starts the
 shell in a transient unit with a PAM login session, outside the sandbox, and `setsid --ctty`
 makes the terminal its controlling terminal so window sizes reach the shell. A shell idle for
-`web.shell_idle_minutes` is closed, and the journal records every opening and end. The Router
+`web.shell_idle_minutes` is closed, and the journal records every opening, end and refusal. The Router
 Manager checks the session and the WebSocket's origin, and relays the bytes to the router after
 both handshakes.
 
@@ -949,3 +949,23 @@ under the administrator's name. The directory becomes part of the system's name
 nslcd, and the system knows only the accounts with console login on. A user enrolled for TOTP types
 the code after the password at the SSH and sudo prompts. Homes are created at the first login and
 are not removed with the user. A password is changed through the directory, not with `passwd`.
+
+## ADR-35: WireGuard peers are the devices of the VPN users, kept in the directory
+
+Context: The WireGuard endpoint could be switched on from the Router Manager, but its peers were
+written by hand into `wg0.conf`, so nobody could connect without SSH. A peer is a P2S client like
+an OpenVPN or IKEv2 user, and one person may have several devices.
+
+Decision: A VPN user's entry holds the user's WireGuard peers in the multi-valued attribute
+`vpnRouterWireGuardPeer`, one value `<public key> <IP>[,<IP>...]` per device; the router never
+sees a private key. `PUT /users/<name>` replaces a user's peers after checking the keys, which
+are unique, and the IPs, which do not overlap another peer's or cover the router's address. Setup
+reads the peers of the users who are not disabled from the directory and writes them as a marked
+block of `[Peer]` sections into `wg0.conf`; sections outside the block, added by hand, stay. A
+change of the peers, and disabling, enabling or removing a user with peers, restart setup. The
+Router Manager adds and removes peers on the WireGuard tab of Remote access management, where the
+endpoint is, choosing the user for each.
+
+Consequences: Peers follow their users: disabling a user drops the user's devices, and the
+directory's backup holds them. A peer cannot exist without a VPN user. A change restarts
+`wg-quick@wg0` through setup, which briefly interrupts the other peers.

README.md

@@ -114,7 +114,7 @@ must have the type shown below; an unknown section or setting is an error.
 | `p2s` | `enabled` | boolean | `false` | Road-warrior access |
 | `p2s` | `address_pool` | string | | CIDR assigned to road-warrior clients |
 | `wireguard` | `enabled` | boolean | `false` | WireGuard endpoint |
-| `wireguard` | `address` | string | | Address and prefix for `wg0`, for example `192.168.200.1/24` |
+| `wireguard` | `address` | string | | The router's own address on `wg0` with the prefix of the peers' network, for example `192.168.200.1/24`; the network and the broadcast address of a network larger than /31 are refused |
 | `wireguard` | `listen_port` | integer | `51820` | UDP port |
 | `openvpn` | `enabled` | boolean | `false` | OpenVPN access for users |
 | `openvpn` | `address_pool` | string | | IPv4 CIDR assigned to OpenVPN clients |
@@ -237,9 +237,17 @@ an FQDN or an IPv4 or IPv6 address. They are written to the strongSwan configura
 strongSwan reads an address as an IP identity and a name as an FQDN, so a leading `@` is not needed
 and is refused. Road-warrior and OpenVPN access need a name in `wan.local_fqdn`.
 
-WireGuard peers are added by hand in `/etc/wireguard/wg0.conf`. The package owns the
+WireGuard peers are P2S users' devices: a VPN user of the router's directory may have up to 16
-`[Interface]` section of that file and rewrites it when the settings above change, but it
+peers, each with its public key and its IPs, IPv4 addresses or networks, kept in the user's
-carries every `[Peer]` section across untouched.
+entry (`vpnRouterWireGuardPeer`) and set with `PUT /users/<name>` (`wireguard_peers`) or on the
+WireGuard tab of the Router Manager's Remote access management. A key is used by one peer only,
+the IPs of two peers may not overlap, and no peer's IPs cover the router's own address of
+`wireguard.address`. The package owns the `[Interface]` section of `/etc/wireguard/wg0.conf` and,
+between the lines `# BEGIN` and `# END WireGuard peers of the users of the router's directory`, a
+`[Peer]` section for each peer of a user who is not disabled; setup rewrites them when the
+settings or the peers change, and a change of a user's peers, disabling, enabling or removing a
+user with peers restarts setup. Every other `[Peer]` section, added by hand, is carried across
+untouched. While the directory cannot be reached, the users' peers in the file stay as they are.
 
 Every feature is independent. Leaving a group empty simply means that feature is not
 configured, and its generated files are removed.
@@ -885,7 +893,7 @@ The status holds the state of `vpn-router-setup`, `slapd` and each PostgreSQL cl
 `vpn-router-manager` when that package is installed, of `strongswan` when site-to-site or
 road-warrior access is configured, of `wg-quick@wg0` when WireGuard is, and of
 `openvpn-server@vpn-router` when OpenVPN is; the number of connected
-OpenVPN clients, from the server's status file, which OpenVPN rewrites every minute; the package version and,
+OpenVPN clients, from the server's status file, which OpenVPN rewrites every 5 seconds; the package version and,
 as `manager_version`, the installed version of `vpn-router-manager` (`null`, shown as not installed, without it); whether
 Docker is installed, and when it is, the state of `docker.service` and of `vpn-router-docker`
 (the Docker rules), which do not change `status`; as `site_to_site`, the number of site-to-site
@@ -901,7 +909,7 @@ curl http://10.0.0.4:7081/status
 
 ### Tokens and signing in
 
-`/config`, `/users`, `/service-accounts`, `/groups`, `/site-to-site`, `/shell` and `/account` need a JWT in an `Authorization: Bearer` header, signed with
+`/config`, `/users`, `/service-accounts`, `/groups`, `/site-to-site`, `/backup`, `/remote-access`, `/ca`, `/shell` and `/account` need a JWT in an `Authorization: Bearer` header, signed with
 HS256 by the key the web service makes on its first run, `/etc/vpn-router/web.key` (root only).
 The key never leaves the router; while it does not exist these paths and `/auth` are not served
 (404). A missing, expired or wrongly signed token, or one of another algorithm, gets 401 with
@@ -984,7 +992,7 @@ the router are the terminal's output. The shell is a PAM login session of the co
 run by `systemd-run` in a transient unit `vpn-router-shell-<id>`; sudo works as for SSH. It is closed after `web.shell_idle_minutes` without a keystroke, when the shell
 exits, or when the connection closes; the router then sends a close frame with the reason. The
 journal of `vpn-router-web` records who opened each shell, from which address, in which unit,
-when it ended and why.
+when it ended and why, and each refused ticket or shell with the reason.
 
 ### The /config page
 
@@ -998,7 +1006,7 @@ when it ended and why.
 | `wireguard` | The public key and port of `wg0`, and each peer's public key, endpoint, allowed IPs, handshake age and traffic; no private or preshared key |
 | `docker` | `docker.exposed_ports` and the rules of the `VPN-ROUTER-DOCKER` chain |
 | `postgresql` | `clusters`: each PostgreSQL cluster of `pg_lsclusters` with its version, name, port, status and data directory, and for one that is online its `settings`: `server_version`, `listen_addresses`, `port`, `max_connections`, `shared_buffers`, `effective_cache_size`, `work_mem`, `password_encryption`, `ssl` and `timezone`; `null` when `pg_lsclusters` fails |
-| `caddy` | The installed Caddy: `version`, and `source`, `upstream` once Caddy's repository is configured and `ubuntu` otherwise; `null` when Caddy is not installed |
+| `caddy` | The installed Caddy: `version`, `source`, `upstream` once Caddy's repository is configured and `ubuntu` otherwise, and `service`, the state of `caddy.service`; `null` when Caddy is not installed |
 
 ### The /postgresql page
 
@@ -1017,9 +1025,9 @@ and answer bodies are JSON; a request body is at most 65536 bytes.
 
 | Request | Body | Answer |
 | --- | --- | --- |
-| `GET /users` | | `{"users": [{"name", "manager_only", "service", "internal", "enabled", "locked", "certificate", "otp", "console", "first_name", "last_name", "email"}, ...]}`; `console` is `null` or `{"enabled", "account", "local", "uid"}` |
+| `GET /users` | | `{"users": [{"name", "manager_only", "service", "internal", "enabled", "locked", "certificate", "otp", "console", "wireguard_peers", "first_name", "last_name", "email"}, ...], "wireguard": {"enabled", "address"}}`; `console` is `null` or `{"enabled", "account", "local", "uid"}`, `wireguard_peers` a list of `{"public_key", "ips"}`, and `wireguard` the endpoint's settings, whose network the peers' addresses come from |
 | `POST /users` | `{"name", "password", "first_name", "last_name", "email"}` for a VPN user; `{"name", "password", "email"?}` for a Manager-only account | 201 and the user |
-| `PUT /users/<name>` | any of `{"first_name", "last_name", "email"}`; for a Manager-only account only `{"email"}`, `""` removing it | the user |
+| `PUT /users/<name>` | any of `{"first_name", "last_name", "email", "wireguard_peers"}`; `wireguard_peers`, `[{"public_key", "ips"}]`, replaces a VPN user's WireGuard peers (see Configuration); for a Manager-only account only `{"email"}`, `""` removing it | the user |
 | `PUT /users/<name>/password` | `{"password": ...}` | the user |
 | `POST /users/<name>/disable` | | the user |
 | `POST /users/<name>/enable` | | the user |
@@ -1142,6 +1150,23 @@ The answer of `GET /backup` holds:
 
 A change is made, checked and applied as for `/site-to-site`.
 
+### The /remote-access API
+
+`/remote-access` shows and changes the remote access systems, IKEv2 road-warrior (`p2s`),
+OpenVPN (`openvpn`) and WireGuard (`wireguard`), with the same token as `/users`.
+
+| Request | Body | Answer |
+| --- | --- | --- |
+| `GET /remote-access` | | `{"p2s", "openvpn", "wireguard", "running", "local_fqdn", "wireguard_server"}`; `wireguard_server` is `{"public_key", "endpoint", "allowed_ips"}`: the router's WireGuard public key (`null` before setup made it), `<wan.local_fqdn>:<wireguard.listen_port>` (`null` without a name) and the networks a peer reaches through the tunnel, the router's local CIDRs and the WireGuard network |
+| `PUT /remote-access/<system>` | any of the settings of the section `p2s`, `openvpn` or `wireguard` | the section |
+
+`running` tells for each system whether setup runs it. IKEv2 and OpenVPN run once enabled with an
+address pool, `wan.local_fqdn` set and the router's VPN server certificate issued by the P2S CA;
+WireGuard once enabled with an address. A system enabled without its address pool or address is
+refused. A change is made, checked and applied as for `/site-to-site`. The router's firewall
+follows the settings; a cloud firewall in front of the router, such as an Azure network security
+group, must allow the OpenVPN and WireGuard ports itself.
+
 ### The /ca API
 
 `/ca` manages the PKI (see Certificates) with the same token as `/users`, with the module

debian-package/debian/changelog

@@ -1,3 +1,78 @@
+vpn-router (0.25.3-1) unstable; urgency=medium
+
+  fix: /config gives the state of caddy.service with the installed Caddy, for the Router Manager's Web page.
+
+  * caddy of /config is {"version", "source", "service"}.
+
+ -- Slawomir Koszewski <slawek@koszewscy.waw.pl>  Tue, 03 Nov 2026 05:00:00 +0100
+
+vpn-router (0.25.2-1) unstable; urgency=medium
+
+  fix: wireguard.address must be the router's own address in its network, not the network or broadcast address, from which the peers' addresses are told apart.
+
+  * A wireguard.address that is the network or the broadcast address of a
+    network larger than /31, such as 192.168.232.0/24, is refused with the
+    first address of the network as the example.
+
+ -- Slawomir Koszewski <slawek@koszewscy.waw.pl>  Tue, 03 Nov 2026 02:30:00 +0100
+
+vpn-router (0.25.1-1) unstable; urgency=medium
+
+  fix: /remote-access gives the router's WireGuard public key, endpoint and allowed IPs, which a peer's configuration needs.
+
+  * GET /remote-access answers wireguard_server: {"public_key",
+    "endpoint", "allowed_ips"}.
+
+ -- Slawomir Koszewski <slawek@koszewscy.waw.pl>  Tue, 03 Nov 2026 01:30:00 +0100
+
+vpn-router (0.25.0-1) unstable; urgency=medium
+
+  feature: a VPN user has WireGuard peers, each a device with its public key and IPs, kept in the directory and written into wg0.conf by setup.
+
+  * PUT /users/<name> takes wireguard_peers, [{"public_key", "ips"}],
+    which replaces the user's peers; keys are unique and IPs may not
+    overlap another peer's or cover the router's WireGuard address.
+  * GET /users answers each user's wireguard_peers and the WireGuard
+    endpoint's enabled and address.
+  * Setup writes a [Peer] section into wg0.conf for each peer of a user
+    who is not disabled, in a marked block, and keeps the peers added by
+    hand; changing a user's peers, disabling, enabling or removing a user
+    with peers applies at once.
+
+ -- Slawomir Koszewski <slawek@koszewscy.waw.pl>  Tue, 03 Nov 2026 00:00:00 +0100
+
+vpn-router (0.24.1-1) unstable; urgency=medium
+
+  fix: the status gives the number of connected OpenVPN clients at most 5 seconds old instead of up to a minute.
+
+  * The OpenVPN server writes its status file every 5 seconds, so a
+    refresh of the status shows clients that connected or left since.
+
+ -- Slawomir Koszewski <slawek@koszewscy.waw.pl>  Mon, 02 Nov 2026 23:30:00 +0100
+
+vpn-router (0.24.0-1) unstable; urgency=medium
+
+  feature: /remote-access of the web service shows and changes the settings of IKEv2 road-warrior, OpenVPN and WireGuard access and whether each runs, for the Router Manager's Remote access page.
+
+  * GET /remote-access answers the p2s, openvpn and wireguard sections,
+    which of them setup runs, and wan.local_fqdn; PUT
+    /remote-access/<system> changes one section and restarts setup.
+  * p2s.enabled and openvpn.enabled need their address_pool, and
+    wireguard.enabled its address.
+
+ -- Slawomir Koszewski <slawek@koszewscy.waw.pl>  Mon, 02 Nov 2026 23:00:00 +0100
+
+vpn-router (0.23.2-1) unstable; urgency=medium
+
+  fix: the shell of a user's own POSIX account opens on the first setup that sets up console login, and the journal records each refused shell with the reason.
+
+  * Setup restarts vpn-router-web when it adds ldap to the name service
+    switch, so the web service finds the POSIX accounts of the directory.
+  * The journal of vpn-router-web records each refused ticket and shell,
+    with the user, the address and the reason.
+
+ -- Slawomir Koszewski <slawek@koszewscy.waw.pl>  Mon, 02 Nov 2026 22:00:00 +0100
+
 vpn-router (0.23.1-1) unstable; urgency=medium
 
   fix: the shell runs as the console account of each member of admins, a local account or the user's own POSIX account in the directory, which also signs in with SSH and sudo, instead of one web.shell_user.

debian-package/src/usr/lib/vpn-router/setup

@@ -555,8 +555,8 @@ def manage_console(cfg):
 
     The local group vpnrouter_ldap.CONSOLE_GROUP is created when missing, and sudo lets its members run any command
     with their password. nslcd serves the directory's posixAccounts with console login on through the local socket,
-    and checks their passwords by binding as the user; the passwd line of the name service switch gains ldap, and PAM
+    and checks their passwords by binding as the user; the passwd line of the name service switch gains ldap, which
-    creates a home at the first login. While ssh.ldap_login is true, sshd accepts the password of the group's members;
+    restarts the web service, and PAM creates a home at the first login. While ssh.ldap_login is true, sshd accepts the password of the group's members;
     a drop-in sshd -t refuses is removed again.
     """
     group = vpnrouter_ldap.CONSOLE_GROUP
@@ -601,6 +601,9 @@ def manage_console(cfg):
                     for line in lines]
         if switched != lines:
             NSSWITCH.write_text(''.join(switched), encoding='utf-8')
+            # A running process keeps the name service switch it read first, so the web service's shell would not find
+            # the console accounts of the directory until it restarts.
+            run(['systemctl', 'try-restart', 'vpn-router-web.service'], check=False)
 
         if 'pam_mkhomedir' not in PAM_SESSION.read_text(encoding='utf-8'):
             run(['pam-auth-update', '--enable', 'mkhomedir'], check=False)

debian-package/src/usr/lib/vpn-router/vpnrouter.py

@@ -26,6 +26,7 @@ if str(LIB_DIR) not in sys.path:
 import vpnrouter_ldap
 import vpnrouter_pki
 import vpnrouter_platforms
+import vpnrouter_status
 from vpnrouter_net import DEFAULT_LISTEN, LISTEN_CHOICES, LOOPBACK, ConfigError, detect_interfaces, interface_addresses, ip_output
 
 CONFIG_FILE  = pathlib.Path('/etc/vpn-router/vpn-router.json')
@@ -37,6 +38,11 @@ SITE_TO_SITE   = SWANCTL_CONF_D / 'site-to-site.conf'
 ROAD_WARRIOR   = SWANCTL_CONF_D / 'road-warrior.conf'
 P2S_FORWARDER  = pathlib.Path('/etc/systemd/resolved.conf.d/p2s-forwarder.conf')
 WG_CONF        = pathlib.Path('/etc/wireguard/wg0.conf')
+#: The router's WireGuard public key, which setup writes with its private key.
+WG_PUBLIC_KEY  = pathlib.Path('/etc/wireguard/wg0.pub')
+#: The lines around the [Peer] sections of the users' WireGuard peers in WG_CONF, which setup writes from the directory.
+WG_PEERS_BEGIN = "# BEGIN WireGuard peers of the users of the router's directory"
+WG_PEERS_END   = "# END WireGuard peers of the users of the router's directory"
 OPENVPN_CONF   = pathlib.Path('/etc/openvpn/server/vpn-router.conf')
 OPENVPN_LDAP   = pathlib.Path('/etc/openvpn/server/vpn-router-ldap.conf')
 
@@ -435,6 +441,9 @@ def validate(cfg):
                 raise ValueError
         except ValueError:
             raise ConfigError(f'openvpn.address_pool: {openvpn_pool!r} is not an IPv4 network')
+    for system, option in (('p2s', 'address_pool'), ('openvpn', 'address_pool'), ('wireguard', 'address')):
+        if _get(cfg, system, 'enabled') and not _get(cfg, system, option):
+            raise ConfigError(f'{system}.enabled needs {system}.{option}')
     _check_address(_get(cfg, 'local', 'int_addr'), 'local.int_addr')
     _check_address(_get(cfg, 'local', 'int_gateway_ip'), 'local.int_gateway_ip')
 
@@ -449,10 +458,16 @@ def validate(cfg):
     wg_address = _get(cfg, 'wireguard', 'address')
     if wg_address:
         try:
-            ipaddress.ip_interface(wg_address)
+            interface = ipaddress.ip_interface(wg_address)
         except ValueError:
             raise ConfigError(
                 f'wireguard.address: {wg_address!r} is not an address with prefix')
+        # The router's own address on wg0, from which the peers' addresses of the same network are told apart.
+        network = interface.network
+        if network.num_addresses > 2 and interface.ip in (network.network_address, network.broadcast_address):
+            raise ConfigError(
+                f'wireguard.address: {wg_address} is the network or broadcast address of {network}; give the '
+                f'router\'s own address in it, such as {next(network.hosts())}/{network.prefixlen}')
 
     port = _get(cfg, 'wireguard', 'listen_port')
     if not 1 <= port <= 65535:
@@ -883,6 +898,8 @@ def build_context(cfg, public_ip=None):
         'wg_enabled':      _get(cfg, 'wireguard', 'enabled'),
         'wg_address':      _get(cfg, 'wireguard', 'address'),
         'wg_listen_port':  _get(cfg, 'wireguard', 'listen_port'),
+        'wg_peers_begin':  WG_PEERS_BEGIN,
+        'wg_peers_end':    WG_PEERS_END,
         'openvpn_enabled': _get(cfg, 'openvpn', 'enabled'),
         'openvpn_pool':    openvpn_pool,
         'openvpn_network': str(openvpn_network.network_address) if openvpn_network else '',
@@ -893,6 +910,8 @@ def build_context(cfg, public_ip=None):
         'openvpn_protocol': _get(cfg, 'openvpn', 'protocol'),
         'openvpn_device':  OPENVPN_DEVICE,
         'openvpn_ldap_conf': str(OPENVPN_LDAP),
+        'openvpn_status':  vpnrouter_status.OPENVPN_STATUS,
+        'openvpn_status_seconds': vpnrouter_status.OPENVPN_STATUS_SECONDS,
         'p2s_dns_list':    _split_list(_join(local_addrs, _split_list(extras['EXTRA_P2S_DNS']))),
         'openvpn_ca':      str(vpnrouter_pki.OPENVPN_CA),
         'openvpn_crl':     str(vpnrouter_pki.OPENVPN_CRL),
@@ -975,27 +994,38 @@ def render(env, ctx, template_name, dest, mode):
 
 
 def existing_peers(path):
-    """Return the [Peer] sections of an existing WireGuard config.
+    """The block of the users' peers and the [Peer] sections added by hand of an existing WireGuard config, each ''
+    without one.
 
-    Peers are added by the operator by hand, so re-rendering the [Interface]
+    The block lies between WG_PEERS_BEGIN and WG_PEERS_END; the [Peer] sections outside it are the operator's, which
-    section must not discard them.
+    re-rendering the file keeps.
     """
     path = pathlib.Path(path)
     if not path.is_file():
-        return ''
+        return '', ''
-    lines = path.read_text(encoding='utf-8').splitlines(keepends=True)
+    text = path.read_text(encoding='utf-8')
+    block = ''
+    begin, end = text.find(WG_PEERS_BEGIN), text.find(WG_PEERS_END)
+    if begin != -1 and end > begin:
+        block = text[begin:end + len(WG_PEERS_END)]
+        text = text[:begin] + text[end + len(WG_PEERS_END):]
+    lines = text.splitlines(keepends=True)
     for index, line in enumerate(lines):
         if line.strip().lower() == '[peer]':
-            return ''.join(lines[index:])
+            return block, ''.join(lines[index:])
-    return ''
+    return block, ''
 
 
 def render_wg_conf(env, ctx, dest=WG_CONF, mode=0o600):
-    """Render wg0.conf, carrying any operator-defined peers across."""
+    """Render wg0.conf: the [Interface], the block of the users' peers of ctx's wg_peers, the block the file holds while
-    content = env.get_template('wg0.conf.j2').render(ctx)
+    wg_peers is None, and the peers the operator added by hand, carried across."""
-    peers = existing_peers(dest)
+    content = env.get_template('wg0.conf.j2').render(ctx).rstrip('\n') + '\n'
-    if peers:
+    block, own = existing_peers(dest)
-        content = content.rstrip('\n') + '\n\n' + peers
+    if ctx['wg_peers'] is not None:
+        block = env.get_template('wg0-peers.conf.j2').render(ctx).strip('\n') if ctx['wg_peers'] else ''
+    for part in (block, own):
+        if part.strip():
+            content += '\n' + part.strip('\n') + '\n'
 
     dest = pathlib.Path(dest)
     if dest.exists() and dest.read_text(encoding='utf-8') == content:
@@ -1064,6 +1094,13 @@ def configure(cfg=None, public_ip=None):
             notices = [f'the PKI is left as it is: the directory cannot be reached: {exc}']
     for notice in notices:
         warn(notice)
+    # The WireGuard peers of the users; None keeps those of wg0.conf while the directory cannot be reached.
+    ctx['wg_peers'] = None
+    if wg_ready(ctx):
+        try:
+            ctx['wg_peers'] = vpnrouter_ldap.wireguard_peers()
+        except ldap.LDAPError as exc:
+            warn(f'the WireGuard peers of the users are left as they are: the directory cannot be reached: {exc}')
     # What needs the router's own certificates.
     ctx['server_certificate'] = vpnrouter_pki.VPN_SERVER_CERT.is_file()
     for connection in ctx['connections']:

debian-package/src/usr/lib/vpn-router/vpnrouter_ldap.py

@@ -66,7 +66,8 @@ OVERLAYS = ('ppolicy', 'otp')
 #: authorization scopes, of which service marks a service account, displayName and
 #: description, the labels of a service account, and vpnRouterConsoleLogin and
 #: vpnRouterConsoleAccount, whether the user may use a console and the local account it runs as,
-#: without which it runs as the user's own posixAccount. vpnRouterAuthority is a CA of the PKI: its
+#: without which it runs as the user's own posixAccount, and vpnRouterWireGuardPeer, each a
+#: WireGuard peer of the user as "<public key> <IP>[,<IP>...]". vpnRouterAuthority is a CA of the PKI: its
 #: certificate and CRL (cACertificate and certificateRevocationList of RFC 4523), its key, the
 #: CSR it waits with for the offline root, the number of its last CRL, where the CRL came from,
 #: and when it was retired. vpnRouterCertificate is a certificate a CA issued, named by its
@@ -97,11 +98,13 @@ SCHEMA_ATTRIBUTE_TYPES = (
     "EQUALITY booleanMatch SYNTAX 1.3.6.1.4.1.1466.115.121.1.7 SINGLE-VALUE )",
     f"( {SCHEMA_OID}.1.14 NAME 'vpnRouterConsoleAccount' DESC 'VPN router: the local account the console of the user runs as' "
     f"{_STRING} )",
+    f"( {SCHEMA_OID}.1.15 NAME 'vpnRouterWireGuardPeer' DESC 'VPN router: a WireGuard peer of the user, its public key and IPs' "
+    "EQUALITY caseExactMatch SYNTAX 1.3.6.1.4.1.1466.115.121.1.15{1024} )",
 )
 SCHEMA_OBJECT_CLASSES = (
     f"( {SCHEMA_OID}.2.1 NAME 'vpnRouterAccount' DESC 'VPN router: properties of a user or a Manager-only account' "
     "SUP top AUXILIARY MAY ( mail $ vpnRouterScope $ displayName $ description $ vpnRouterConsoleLogin $ "
-    "vpnRouterConsoleAccount ) )",
+    "vpnRouterConsoleAccount $ vpnRouterWireGuardPeer ) )",
     f"( {SCHEMA_OID}.2.2 NAME 'vpnRouterAuthority' DESC 'VPN router: a CA of the PKI' SUP top STRUCTURAL MUST cn "
     "MAY ( cACertificate $ certificateRevocationList $ vpnRouterPrivateKey $ vpnRouterCertificateRequest $ "
     "vpnRouterCRLNumber $ vpnRouterCRLSource $ vpnRouterRetired ) )",
@@ -116,6 +119,9 @@ TOTP_ALGORITHM = '1.2.840.113549.2.7'
 TOTP_PERIOD = 30
 TOTP_WINDOW = 1
 
+#: The value of pwdAccountLockedTime that disables a user until it is enabled again.
+DISABLED = '000001010000Z'
+
 #: The indexes of the database.
 INDEXES = ('objectClass eq', 'uid eq', 'uidNumber eq', 'vpnRouterConsoleLogin eq')
 
@@ -287,6 +293,23 @@ def _ensure_manager(connection):
         MANAGER_SECRET.write_text(password, encoding='utf-8')
 
 
+def wireguard_peers():
+    """The WireGuard peers of the users who are not disabled, read as root: [(user, public key, [IP, ...])], sorted."""
+    connection = root()
+    try:
+        found = connection.search_s(USERS, ldap.SCOPE_ONELEVEL,
+                                    f'(&(vpnRouterWireGuardPeer=*)(!(pwdAccountLockedTime={DISABLED})))',
+                                    ['uid', 'vpnRouterWireGuardPeer'])
+    finally:
+        connection.unbind_s()
+    peers = []
+    for _, attributes in found:
+        for value in attributes['vpnRouterWireGuardPeer']:
+            key, _, ips = value.decode().partition(' ')
+            peers.append((attributes['uid'][0].decode(), key, ips.split(',')))
+    return sorted(peers)
+
+
 def provision():
     """Create or bring up to date the modules, the package's schema, database, ACLs, password policy, entries and service account."""
     connection = root()

debian-package/src/usr/lib/vpn-router/vpnrouter_status.py

@@ -12,6 +12,9 @@ COMMAND_TIMEOUT = 5
 
 OPENVPN_STATUS = '/run/openvpn-server/status-vpn-router.log'
 
+#: Seconds between two writes of OPENVPN_STATUS by the OpenVPN server, whose configuration sets it (OpenVPN's default is 60).
+OPENVPN_STATUS_SECONDS = 5
+
 #: Seconds since its last handshake within which a WireGuard peer counts as connected.
 WIREGUARD_CONNECTED_SECONDS = 180
 

debian-package/src/usr/lib/vpn-router/vpnrouter_users.py

@@ -20,6 +20,10 @@ optional description and at least one member; a group cannot be empty, so the la
 cannot leave it and a user who is the last member of a group cannot be removed. Groups only
 record membership; nothing on the router reads them.
 
+A VPN user may have WireGuard peers, each a device with its public key and its IPs, in
+vpnRouterWireGuardPeer; vpn-router-setup writes a [Peer] of wg0.conf for each peer of a user who
+is not disabled.
+
 A user may have a TOTP token: the user entry itself is an oathTOTPUser and oathTOTPToken whose
 oathTOTPToken points to itself, with the secret in oathSecret and the parameters of
 vpnrouter_ldap.TOTP_PARAMS. Enrolment stores nothing until a code of the new secret is
@@ -48,6 +52,7 @@ import calendar
 import contextlib
 import fcntl
 import grp
+import ipaddress
 import pwd
 import re
 import subprocess
@@ -78,7 +83,9 @@ LABELS = (('display_name', 'displayName'), ('description', 'description'))
 #: The attributes read for a user.
 ATTRIBUTES = ['uid', 'objectClass', 'pwdAccountLockedTime', 'givenName', 'sn', 'mail', 'oathTOTPToken', 'vpnRouterScope',
               'displayName', 'description', 'userCertificate;binary', 'vpnRouterConsoleLogin', 'vpnRouterConsoleAccount',
-              'uidNumber']
+              'uidNumber', 'vpnRouterWireGuardPeer']
+#: The most WireGuard peers of one user.
+WIREGUARD_PEERS_MAX = 16
 #: The vpnRouterScope of a service account.
 SERVICE_SCOPE = 'service'
 #: The object classes of a VPN user and of a Manager-only account.
@@ -94,7 +101,7 @@ GROUP_ATTRIBUTES = ['cn', 'description', 'member']
 #: The longest group description, in characters.
 DESCRIPTION_MAX = 256
 #: The value of pwdAccountLockedTime that disables an account until it is enabled.
-LOCKED = b'000001010000Z'
+LOCKED = vpnrouter_ldap.DISABLED.encode()
 #: The group whose members manage the router through the web service.
 ADMIN_GROUP = 'admins'
 #: The digits of a TOTP code given to login().
@@ -244,6 +251,7 @@ def summary(attributes):
         'certificate': 'userCertificate;binary' in attributes,
         'otp': 'oathTOTPToken' in attributes,
         'console': console_of(attributes),
+        'wireguard_peers': peers_of(attributes),
     }
     for key, attribute in PERSON + LABELS:
         values = attributes.get(attribute)
@@ -267,6 +275,62 @@ def console_of(attributes):
     }
 
 
+def peers_of(attributes):
+    """The WireGuard peers of an entry as the answers show them: [{public_key, ips}], in the order they are stored."""
+    peers = []
+    for value in attributes.get('vpnRouterWireGuardPeer', []):
+        key, _, ips = value.decode().partition(' ')
+        peers.append({'public_key': key, 'ips': ips.split(',')})
+    return peers
+
+
+def checked_peers(connection, name, peers):
+    """The values of vpnRouterWireGuardPeer for the user's WireGuard peers, [{public_key, ips}], when they are valid.
+
+    A public key is 32 bytes in base64, used by no other peer of any user; each peer has at least one IP, an IPv4
+    address or network, which no other peer of any user covers and which does not cover the router's own address of
+    wireguard.address. A user has at most WIREGUARD_PEERS_MAX peers.
+    """
+    if not isinstance(peers, list) or len(peers) > WIREGUARD_PEERS_MAX:
+        raise Failure(f'wireguard_peers must be a list of at most {WIREGUARD_PEERS_MAX} peers', 2)
+    router = vpnrouter.load_config()['wireguard']['address'].strip()
+    taken = [(other['name'], key, network)
+             for other in list_users(connection)['users'] if other['name'] != name
+             for peer in other['wireguard_peers'] for key in [peer['public_key']]
+             for network in (ipaddress.ip_network(ip) for ip in peer['ips'])]
+    values = []
+    for peer in peers:
+        key = peer.get('public_key') if isinstance(peer, dict) else None
+        ips = peer.get('ips') if isinstance(peer, dict) else None
+        try:
+            if not isinstance(key, str) or len(base64.b64decode(key.strip(), validate=True)) != 32:
+                raise ValueError
+        except ValueError:
+            raise Failure(f'{key!r} is not a WireGuard public key: 32 bytes in base64', 2)
+        key = key.strip()
+        if not isinstance(ips, list) or not ips or not all(isinstance(ip, str) for ip in ips):
+            raise Failure(f'the peer {key} needs at least one IP', 2)
+        networks = []
+        for ip in ips:
+            try:
+                network = ipaddress.ip_network(ip.strip(), strict=True)
+            except ValueError:
+                raise Failure(f'{ip!r} is not an IPv4 address or network of the peer {key}', 2)
+            if network.version != 4:
+                raise Failure(f'{ip!r} of the peer {key} is not IPv4', 2)
+            if router and ipaddress.ip_interface(router).ip in network:
+                raise Failure(f'{network} of the peer {key} covers the router\'s own address {router}', 2)
+            for owner, other_key, other in taken:
+                if other_key == key:
+                    raise Failure(f'the key {key} is a peer of {owner}', 4)
+                if network.overlaps(other):
+                    raise Failure(f'{network} of the peer {key} overlaps {other} of {owner}', 4)
+            networks.append(network)
+        taken += [(name, key, network) for network in networks]
+        values.append(f'{key} {",".join(str(network) for network in networks)}'.encode())
+    return values
+
+
 def classes(attributes):
     """The object classes of an entry, in lower case."""
     return {value.decode().lower() for value in attributes.get('objectClass', [])}
@@ -412,7 +476,8 @@ def add(connection, name, password, values, service=False):
 
 
 def update(connection, name, values):
-    """Change the person attributes values gives; the cn follows the first and the last name.
+    """Change the person attributes values gives, the cn following the first and the last name, and of a VPN user the
+    WireGuard peers, wireguard_peers, which replace the user's peers (checked_peers).
 
     A Manager-only account has only the e-mail address, which '' removes; a service account also its labels
     (update_service).
@@ -421,6 +486,8 @@ def update(connection, name, values):
     if service(current):
         return update_service(connection, name, values)
     if manager_only(current):
+        if values.get('wireguard_peers') is not None:
+            raise Failure(f'user {name} is a Manager-only account, which has no VPN access and so no WireGuard peers', 2)
         if values.get('first_name') is not None or values.get('last_name') is not None:
             raise Failure(f'user {name} is a Manager-only account, which has no first or last name', 2)
         email = values.get('email')
@@ -433,16 +500,30 @@ def update(connection, name, values):
             connection.modify_s(dn_of(name), [(ldap.MOD_REPLACE, 'mail', [person({'email': email}, required=False)['mail'].encode()])])
         return summary(entry(connection, name))
     details = person(values, required=False)
-    if not details:
+    peers = values.get('wireguard_peers')
-        raise Failure('give at least one of first_name, last_name and email', 2)
+    if not details and peers is None:
-    names = {attribute: current[attribute][0].decode() for attribute in ('givenName', 'sn') if current.get(attribute)}
+        raise Failure('give at least one of first_name, last_name, email and wireguard_peers', 2)
-    names.update({attribute: details[attribute] for attribute in ('givenName', 'sn') if attribute in details})
+    changes = []
-    changes = [(ldap.MOD_REPLACE, attribute, [value.encode()]) for attribute, value in details.items()]
+    if details:
-    changes.append((ldap.MOD_REPLACE, 'cn', [common_name(names, name).encode()]))
+        names = {attribute: current[attribute][0].decode() for attribute in ('givenName', 'sn') if current.get(attribute)}
+        names.update({attribute: details[attribute] for attribute in ('givenName', 'sn') if attribute in details})
+        changes += [(ldap.MOD_REPLACE, attribute, [value.encode()]) for attribute, value in details.items()]
+        changes.append((ldap.MOD_REPLACE, 'cn', [common_name(names, name).encode()]))
+    if peers is not None:
+        if 'vpnrouteraccount' not in classes(current):
+            changes.append((ldap.MOD_ADD, 'objectClass', [b'vpnRouterAccount']))
+        changes.append((ldap.MOD_REPLACE, 'vpnRouterWireGuardPeer', checked_peers(connection, name, peers)))
     connection.modify_s(dn_of(name), changes)
+    if peers is not None:
+        apply_wireguard()
     return summary(entry(connection, name))
 
 
+def apply_wireguard():
+    """Have vpn-router-setup write the WireGuard peers of the users into wg0.conf, without waiting for it."""
+    subprocess.run(['systemctl', 'restart', '--no-block', 'vpn-router-setup.service'], capture_output=True)
+
+
 def update_service(connection, name, values):
     """Change any of the e-mail address and the labels (labels) of a service account that values gives; '' removes one."""
     if not service(entry(connection, name)):
@@ -466,14 +547,22 @@ def passwd(connection, name, password):
 
 
 def disable(connection, name):
-    if entry(connection, name).get('pwdAccountLockedTime') != [LOCKED]:
+    """Lock the user out; the WireGuard peers of a disabled user are left out of wg0.conf."""
+    current = entry(connection, name)
+    if current.get('pwdAccountLockedTime') != [LOCKED]:
         connection.modify_s(dn_of(name), [(ldap.MOD_REPLACE, 'pwdAccountLockedTime', [LOCKED])])
+        if 'vpnRouterWireGuardPeer' in current:
+            apply_wireguard()
     return summary(entry(connection, name))
 
 
 def enable(connection, name):
-    if entry(connection, name).get('pwdAccountLockedTime') == [LOCKED]:
+    """Let the user in again, with the WireGuard peers."""
+    current = entry(connection, name)
+    if current.get('pwdAccountLockedTime') == [LOCKED]:
         connection.modify_s(dn_of(name), [(ldap.MOD_DELETE, 'pwdAccountLockedTime', None)])
+        if 'vpnRouterWireGuardPeer' in current:
+            apply_wireguard()
     return summary(entry(connection, name))
 
 
@@ -579,6 +668,8 @@ def remove(connection, name):
         raise Failure(f'the certificate cannot be revoked: {failure}', failure.status)
     connection.delete_s(dn_of(name))
     end_sessions(current)
+    if 'vpnRouterWireGuardPeer' in current:
+        apply_wireguard()
     return {'name': name, 'removed': True}
 
 

debian-package/src/usr/lib/vpn-router/web

@@ -28,6 +28,9 @@ Pages:
            applied by vpn-router-setup (see site_to_site())
   /backup  the backup settings, the last run and the local archives: show, change and run
            now (see backup())
+  /remote-access
+           the settings of IKEv2 road-warrior, OpenVPN and WireGuard access and whether each
+           runs: show and change, applied by vpn-router-setup (see remote_access())
   /ca      the PKI: its settings, the root and issuing CAs, the certificates issued; change the
            settings, issue and revoke certificates, and take the certificate of an issuing CA
            and a root CRL signed offline (see ca())
@@ -46,7 +49,7 @@ Pages:
            the databases of each PostgreSQL cluster on the router with their sizes, as JSON (see
            postgresql_databases()); /config has the clusters' settings
 
-/status/full, /config, /metrics/history, /postgresql, /users, /service-accounts, /groups, /site-to-site, /backup, /ca, /shell and /account need an HS256 JWT in an Authorization: Bearer header signed
+/status/full, /config, /metrics/history, /postgresql, /users, /service-accounts, /groups, /site-to-site, /backup, /remote-access, /ca, /shell and /account need an HS256 JWT in an Authorization: Bearer header signed
 with vpnrouter_auth.WEB_KEY (see vpnrouter_auth.verify). A token of /auth names a user in sub;
 /account serves that user, and the other paths need a member of vpnrouter_users.ADMIN_GROUP. A
 token of vpn-router-token has the admin claim and names no user; it may call every path but
@@ -86,6 +89,7 @@ import collections
 import configparser
 import fcntl
 import hashlib
+import ipaddress
 import json
 import os
 import pwd
@@ -150,6 +154,9 @@ BODY_LIMIT = 65536
 #: The settings of a site_to_site connection that /site-to-site adds and changes.
 CONNECTION_SETTINGS = ('addrs', 'id', 'cidrs', 'local_cidrs', 'local_id_mode', 'auth', 'psk', 'remote_ca')
 
+#: The sections of the remote access systems /remote-access changes: IKEv2 road-warrior, OpenVPN and WireGuard.
+REMOTE_ACCESS = ('p2s', 'openvpn', 'wireguard')
+
 #: The HTTP status for each status of a vpnrouter_users.Failure; any other is 500.
 USER_STATUS = {2: 400, 3: 404, 4: 409, 5: 401}
 
@@ -396,7 +403,7 @@ def postgresql_databases():
 
 def details(state):
     """What /config shows: the configuration without its secrets, and what the router resolved and runs; caddy is the
-    installed Caddy, {version, source}, null when it is not installed."""
+    installed Caddy, {version, source, service}, service the state of caddy.service, null when it is not installed."""
     configuration = state.get('configuration', {})
     caddy = package_version('caddy')
     return {
@@ -413,8 +420,8 @@ def details(state):
         },
         'postgresql': postgresql_configuration(),
         # Caddy is upstream's once its repository is configured (vpn-router-caddy).
-        'caddy': {'version': caddy, 'source': 'upstream' if vpnrouter.CADDY_APT_SOURCE.is_file() else 'ubuntu'}
+        'caddy': {'version': caddy, 'source': 'upstream' if vpnrouter.CADDY_APT_SOURCE.is_file() else 'ubuntu',
-                 if caddy else None,
+                  'service': unit_state('caddy.service')} if caddy else None,
     }
 
 
@@ -501,10 +508,12 @@ def html_of(status):
 def users(state, method, path, body):
     """Answer a /users request with vpnrouter_users: the HTTP status and the JSON document.
 
-      GET    /users                   the users
+      GET    /users                   the users, and {"enabled", "address"} of wireguard, whose network their
+                                      WireGuard peers take their addresses from
       POST   /users                   add a user: {"name", "password", "first_name", "last_name", "email"};
                                       without the names a Manager-only account
-      PUT    /users/<name>            change any of {"first_name", "last_name", "email"}
+      PUT    /users/<name>            change any of {"first_name", "last_name", "email", "wireguard_peers"};
+                                      wireguard_peers, [{"public_key", "ips"}], replaces the user's peers
       PUT    /users/<name>/password   set the password: {"password": ...}
       POST   /users/<name>/disable    lock the user out of OpenVPN
       POST   /users/<name>/enable     let the user in again
@@ -527,7 +536,8 @@ def users(state, method, path, body):
     name = parts[1] if len(parts) > 1 else None
     actions = {
         ('GET', 1, None): lambda connection: {
-            'users': [user for user in vpnrouter_users.list_users(connection)['users'] if not user['service']]},
+            'users': [user for user in vpnrouter_users.list_users(connection)['users'] if not user['service']],
+            'wireguard': {option: vpnrouter.load_config()['wireguard'][option] for option in ('enabled', 'address')}},
         ('POST', 1, None): lambda connection: vpnrouter_users.add(connection, body.get('name'), body.get('password'), body),
         ('PUT', 2, None): lambda connection: vpnrouter_users.update(connection, name, body),
         ('PUT', 3, 'password'): lambda connection: vpnrouter_users.passwd(connection, name, body.get('password')),
@@ -814,6 +824,68 @@ def backup(method, path, body):
     return 200, {'settings': backup_settings(cfg['backup'])}
 
 
+def wireguard_server(cfg, state):
+    """What a WireGuard peer's configuration needs of the router: {public_key, endpoint, allowed_ips}; public_key is
+    null before setup made the key pair, endpoint, <wan.local_fqdn>:<wireguard.listen_port>, null without a name, and
+    allowed_ips the networks reached through the tunnel, the router's local CIDRs and the WireGuard network."""
+    try:
+        public_key = vpnrouter.WG_PUBLIC_KEY.read_text(encoding='utf-8').strip() or None
+    except OSError:
+        public_key = None
+    fqdn = cfg['wan']['local_fqdn'].strip()
+    address = cfg['wireguard']['address'].strip()
+    networks = section(state, 'network').get('local_cidrs')
+    allowed = [cidr for cidr in networks if isinstance(cidr, str)] if isinstance(networks, list) else []
+    if address:
+        allowed.append(str(ipaddress.ip_interface(address).network))
+    return {'public_key': public_key, 'endpoint': f'{fqdn}:{cfg["wireguard"]["listen_port"]}' if fqdn else None,
+            'allowed_ips': list(dict.fromkeys(allowed))}
+
+
+def remote_access(state, method, path, body):
+    """Answer a /remote-access request: the HTTP status and the JSON document.
+
+      GET /remote-access            {"p2s", "openvpn", "wireguard", "running", "local_fqdn", "wireguard_server"}: the
+                                    settings of the three remote access systems (REMOTE_ACCESS), whether setup runs
+                                    each (running: {p2s, openvpn, wireguard}), wan.local_fqdn, which IKEv2 and OpenVPN
+                                    need with the router's VPN server certificate, and what a WireGuard peer's
+                                    configuration needs of the router (wireguard_server)
+      PUT /remote-access/<system>   change any of the settings of the system's section; answers the section
+
+    A change is made as /site-to-site makes one, and applied by restarting vpn-router-setup without waiting for it.
+    """
+    if body == 'invalid' or (body is not None and not isinstance(body, dict)):
+        return 400, {'error': 'the body must be a JSON object'}
+    body = body or {}
+    parts = path.strip('/').split('/')
+    try:
+        if (method, len(parts)) == ('GET', 1):
+            cfg = vpnrouter.load_config()
+            return 200, {**{system: cfg[system] for system in REMOTE_ACCESS},
+                         'running': {system: bool(state.get(system)) for system in REMOTE_ACCESS},
+                         'local_fqdn': cfg['wan']['local_fqdn'],
+                         'wireguard_server': wireguard_server(cfg, state)}
+        if method != 'PUT' or len(parts) != 2 or parts[1] not in REMOTE_ACCESS:
+            return 404, {'error': f'no route {method} {path}'}
+        system = parts[1]
+        settings = {option: body[option] for option in vpnrouter.SCHEMA[system] if option in body}
+        with vpnrouter.config_lock():
+            data = vpnrouter.read_settings()
+            current = data.get(system)
+            data[system] = {**(current if isinstance(current, dict) else {}), **settings}
+            cfg = vpnrouter.with_defaults(data)
+            vpnrouter.validate(cfg)
+            vpnrouter.save_config(data)
+    except vpnrouter.ConfigError as exc:
+        return 400, {'error': str(exc)}
+    except OSError as exc:
+        return 500, {'error': f'the configuration cannot be written: {exc}'}
+    except SystemExit as exc:
+        return 500, {'error': str(exc.code)}
+    run('systemctl', 'restart', '--no-block', 'vpn-router-setup.service')
+    return 200, cfg[system]
+
+
 def ca(method, path, body):
     """Answer a /ca request with vpnrouter_pki: the HTTP status and the JSON document.
 
@@ -1193,9 +1265,11 @@ class Handler(BaseHTTPRequestHandler):
         The ticket must come from POST /shell for the user named by the token. Binary messages of the client are its
         keystrokes, a text message {"cols", "rows"} sets the window size, and binary messages of the server are the
         terminal's output. The shell ends after web.shell_idle_minutes without a keystroke, when it exits, or when the
-        client closes the connection; the server then closes it with the reason. Each opening and end is logged.
+        client closes the connection; the server then closes it with the reason. Each opening, end and refusal is logged
+        with its reason.
         """
         def refuse(code, message):
+            log(f'shell of {name} from {self.client()} refused: {message}')
             body = json.dumps({'error': message}).encode() + b'\n'
             self.send_response(code)
             self.send_header('Content-Type', 'application/json')
@@ -1317,7 +1391,7 @@ class Handler(BaseHTTPRequestHandler):
         if self.command not in ('GET', 'HEAD'):
             self.close_connection = True
         directory = next((name for name in ('users', 'service-accounts', 'groups', 'account', 'site-to-site', 'backup',
-                                            'ca', 'shell')
+                                            'ca', 'shell', 'remote-access')
                           if path == f'/{name}' or path.startswith(f'/{name}/')), None)
         protected = path in ('/status/full', '/config', '/metrics/history', '/postgresql') or directory is not None
         signing = path in ('/auth', '/auth/refresh', '/auth/logout')
@@ -1360,6 +1434,8 @@ class Handler(BaseHTTPRequestHandler):
         elif directory == 'shell':
             code, document = shell_ticket(claims.get('sub'), payload) if (path, self.command) == ('/shell', 'POST') \
                 else (404, {'error': f'no route {self.command} {path}'})
+            if code != 200:
+                log(f'shell ticket of {claims.get("sub")} from {self.client()} refused: {document["error"]}')
             body, kind = json.dumps(document, indent=2).encode() + b'\n', 'application/json'
         elif directory == 'account':
             code, document = account(claims['sub'], self.command, path, payload)
@@ -1367,6 +1443,9 @@ class Handler(BaseHTTPRequestHandler):
         elif directory == 'site-to-site':
             code, document = site_to_site(self.command, path, payload)
             body, kind = json.dumps(document, indent=2).encode() + b'\n', 'application/json'
+        elif directory == 'remote-access':
+            code, document = remote_access(state, self.command, path, payload)
+            body, kind = json.dumps(document, indent=2).encode() + b'\n', 'application/json'
         elif directory == 'backup':
             code, document = backup(self.command, path, payload)
             body, kind = json.dumps(document, indent=2).encode() + b'\n', 'application/json'

debian-package/src/usr/share/vpn-router/templates/openvpn-server.conf.j2

@@ -24,6 +24,8 @@ push "route {{ network }} {{ netmask }}"
 push "dhcp-option DNS {{ address }}"
 {% endfor -%}
 
+status {{ openvpn_status }} {{ openvpn_status_seconds }}
+
 keepalive 10 120
 {% if openvpn_protocol == 'udp' -%}
 explicit-exit-notify 1

debian-package/src/usr/share/vpn-router/templates/wg0-peers.conf.j2

@@ -0,0 +1,9 @@
+{{ wg_peers_begin }}
+{% for user, key, ips in wg_peers -%}
+[Peer]
+# {{ user }}
+PublicKey = {{ key }}
+AllowedIPs = {{ ips | join(', ') }}
+
+{% endfor -%}
+{{ wg_peers_end }}